Ceramic dimensions can be discussed at different manufacturing stages. A formed part, a fired part and a finally finished item need not share the same dimensional description. Before using a measurement in a Sanxin order, state the stage it represents. The purchase should identify the accepted finished requirement rather than assuming that a forming or intermediate process dimension is the delivered-part acceptance basis.
Identify whether a drawing or record concerns an intermediate manufacturing stage or the final supplied item. Retain the revision and intended purpose. A process drawing can support manufacture without being the appropriate receiving reference for the buyer. The two records should remain connected, but their requirements should not be exchanged merely because they describe a part with the same general shape.
Fine ceramic manufacture can include forming, firing and later finishing, with dimensions considered across those stages. This general process background does not establish a route or tolerance for every offered product. Ask for the actual supplied-part requirement and relevant evidence. Do not assign a universal shrinkage factor or allowance from another manufacturer's example to the part being ordered.
Use the agreed drawing to identify the final dimensions and surface requirements applicable to the purchase. State which features require inspection and the accepted reference basis. If some dimensions are informational or belong to another stage, label them clearly. A receiving team should not have to infer whether the supplier's report describes the unfinished body or the delivered geometry.
In a hypothetical inquiry, an intermediate dimensional record might be sent alongside a final part drawing without its stage identified. An apparent discrepancy could then be mistaken for a delivered-part defect. Resolve the record's purpose before drawing that conclusion. The example does not imply that every discrepancy is harmless; it shows why the actual measured stage must be established first.
If a proposed process or finishing change affects the accepted product basis, identify it through the agreed review. Do not assume that a new intermediate dimension represents a changed final requirement. Equally, do not conceal a proposed delivered-geometry change inside a manufacturing update. The responsible reviewer needs to know which requirement or evidence relationship is actually affected.
Keep samples and inspection records identified by the same stage convention. A development sample can answer a specific question while remaining different from the final supplied item. Retain that scope when the sample is used in fit discussions or quotation comparisons. A favorable intermediate observation does not eliminate the need to verify the final product under the accepted delivery requirements.
Provide Sanxin with the intended supplied geometry and clearly labeled reference information. Ask the offer and delivery report to identify the stages they describe. Retain the accepted final drawing as the receiving basis and preserve process information within its proper role. This supports a clear dimensional discussion without claiming a particular forming route, finishing capability or precision level for an unconfirmed product.
When a later question arises, compare records from matching stages or obtain the responsible explanation of their relationship. The resulting decision can distinguish a documentation misunderstanding from a true product deviation. It does not justify accepting an out-of-requirement delivered part simply because ceramic manufacture includes dimensional change; the actual final acceptance basis still governs the purchase.
Only if the accepted requirement explicitly makes that relationship applicable. Identify the manufacturing stage, final drawing and measurement purpose. Keep intermediate process dimensions distinct from delivered-product acceptance, and avoid applying an assumed universal shrinkage factor.
Review relevant Sanxin ceramic products · Send Sanxin your application details
Submit your demand,
we will contact you ASAP.
Sanxin New Materials Co., Ltd. focus on producing and selling ceramic beads and parts such as grinding media, blasting beads, bearing ball, structure part, ceramic wear-resistant liners, Nanoparticles Nano Powder
English
English
Russian
French
Spanish
Portuguese
Arabic