Desulfurization pipework can combine abrasive slurry contact with a chemical environment that must be defined precisely. A ceramic lining proposal should therefore address both the working face and the other materials exposed at joints and terminations. For a Sanxin inquiry, identify the actual process conditions and the function expected from the lining. General wear resistance does not independently establish corrosion containment or pressure suitability.
Provide the liquid composition information relevant to the plant, solids characteristics and operating temperature range. Include cleaning fluids, flushing and abnormal conditions where expected. If conditions vary by location, describe the affected pipe section specifically. A statement that the line serves desulfurization is a useful context but not a complete compatibility specification.
Map observed wear, leakage and lining damage separately. Show bends, branches, reducers and the installed orientation. Record whether the issue appears at a ceramic face, joint, termination or surrounding shell. This helps the review determine which evidence to request without assuming that abrasion explains leakage or that corrosion explains every missing piece.
Request a section drawing that shows ceramic, joint material, seals, retention, backing and steel. Distinguish normal exposure from possible ingress after local damage. Ask whether the construction relies on any hidden interface remaining dry. The answer matters because a mostly ceramic bore can still contain a small exposed region that governs compatibility.
Review supporting evidence for the actual chemical and thermal conditions. An adhesive or rubber component cannot inherit the ceramic's material properties. Where assembly-level information is incomplete, identify a qualification requirement rather than treating individual material data as a full acceptance. A proposed wear layer should not be described as a corrosion barrier without relevant construction evidence.
Imagine a hypothetical slurry line where damage is concentrated near one flange termination. The plant preserves photographs and reviews the gasket position, lining end detail and local chemical exposure. It investigates ingress and mechanical contact as separate possibilities before specifying a replacement. This scenario illustrates evidence review, not a Sanxin desulfurization case or a confirmed failure mechanism.
The pressure-containing assembly remains subject to its approved design and inspection requirements. Have the equipment owner assess any shell damage or connection change. Ceramic lining does not restore a degraded pressure boundary by assumption. The proposed construction must fit the accepted pressure and support arrangement while addressing its defined surface-protection role.
Send the approved component drawing, slurry exposure description, damage map and connection requirements. Identify fixed dimensions, accessible inspection locations and the maintenance window. Ask the proposal to list relevant contact materials and clarify its lining, attachment and termination details. Resolve uncertainties about chemical compatibility before treating the offer as suitable for service.
Record the initial lining condition and coordinate future observations with the plant's integrity program. Inspect accessible joints and terminations as well as broad faces. Keep wear, leakage, separation and pressure-boundary findings distinct. This produces a review specific to the desulfurization duty and prevents a general ceramic material advantage from becoming an unsupported claim about the complete process pipe.
No. Liquid can contact joints, seals, backing or steel at exposed features or after damage. Review the complete construction against the actual slurry and conditions, while retaining the approved pressure-boundary design and inspection responsibilities.
Review relevant Sanxin ceramic products · Send Sanxin your application details
Submit your demand,
we will contact you ASAP.
Sanxin New Materials Co., Ltd. focus on producing and selling ceramic beads and parts such as grinding media, blasting beads, bearing ball, structure part, ceramic wear-resistant liners, Nanoparticles Nano Powder
English
English
Russian
French
Spanish
Portuguese
Arabic